If you have a large yard, in order to organize the yard, you need to prepare a variety of home gardening tools, arc blade hedge trimmer is a common gardening tool, it can help us quickly and cleanly-mow the grass, make the yard more beautiful, but, You will encounter many faults when using arc blade hedge trimmer, one of the faults is that the blade does not turn, what is this fault? See what the experts have to say.

We need to be clear that there are many reasons why an arc blade hedge trimmer blade does not turn, and here are only a few common reasons.

The first is the problem caused by the blade not being replaced or maintained for a long time. Using the arc blade hedge trimmer for a long time without replacing or maintaining the blade will cause the blade to become dull or rusty, making the blade lack stability and durability when used. In this case, the blade is difficult to turn, or even impossible to turn, it is recommended to replace or repair the blade to ensure work efficiency and the service life of the arc blade hedge trimmer.

The second is the damage of internal components of the arc blade hedge trimmer body, such as the drive shaft, gear and transmission belt. These parts may wear, rust or loosen during use, resulting in the arc blade hedge trimmer blade can not rotate normally. In this case, it is recommended to find professional technicians to carry out maintenance to prevent the damage from expanding.

In addition, the motor of the arc blade hedge trimmer also has problems that cause the blade to fail to turn, such as insufficient motor power supply, loose motor lines or burn out problems. In this case, you can test with a multimeter, and if you find an abnormal resistance, you need to replace the motor or repair the circuit problem.

In order to prevent the problem of blade immobility, we need to regularly maintain and replace the arc blade hedge trimmer, which can not only increase production efficiency, but also extend the service life of the arc blade hedge trimmer.

Maintaining an arc blade hedge trimmer requires attention to the following:

1. Before using arc blade hedge trimmer, check whether arc blade hedge trimmer blade is damaged or has not been replaced for too long.

2, in the process of use, do not cut too long grass or because of excessive force and the blade stuck.

3, clean arc blade hedge trimmer, do not use high pressure water to wet the motor and line.

4, before storing the arc blade hedge trimmer, repair or maintenance should be carried out first, especially replacing the blade.

During the use of arc blade hedge trimmer, once it is found that the blade can not move, it is necessary to cut off the power supply and find out the cause of the fault, among which the blade becomes dull, rusty, the drive shaft, the transmission belt is damaged, the motor is burned out, etc., which is the common cause of the blade can not turn, once the fault is found, the solution is much easier. In addition, with proper use and maintenance, the arc blade hedge trimmer blade can be turned normally.

arc blade hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Arc-Blade