(1) Principle of 60mm spur gear motor wholesale

The small hydraulic cylinder, oil drain throttle valve and oil drain throttle valve together form a manual hydraulic pump for oil removal and oil drainage. When the rod is extended upward, the small piston rod of the manual hydraulic pump goes up to exercise, and the capacity of the lower chamber of the small piston rod is expanded to produce a partial vacuum, resulting in the closure of the oil drain throttle valve, and the hydraulic oil in the oil tank is opened to the oil throttle valve into the chamber under the action of atmospheric pressure. When the large piston rod moves down under the action of force, the capacity of the cavity is reduced, the hydraulic oil is compressed, so the working pressure rises, therefore, the solution that is extruded will turn off the oil throttling valve, and the oil drain throttling valve is top open, and the drain pipe enters the cavity of the large hydraulic cylinder, promoting the displacement of the large piston rod and the extrusion of the product workpiece. The small piston rod of the hand pump continues to move left and right repeatedly, and the product workpiece is slowly squeezed flat. When the product workpiece is pressed to the desired shape, the activity of the small piston rod is terminated, and the working pressure of the hydraulic oil in the cavity of the large hydraulic cylinder will make the oil drain throttle shut off, the solution in the cavity is blocked, and the large piston rod is locked without moving with the product workpiece. At this point, the cut-off valve is closed.

Explain the working principle and features of 60mm spur gear motor wholesale

(2) Working characteristics of 60mm spur gear motor wholesale

As we know from the principle of the solid model of the hydraulic press, the manual hydraulic pump composed of the small hydraulic cylinder, the oil drain throttle valve and the oil removal throttle valve converts the chemical energy of the rod into the pressure energy of the hydraulic oil and exports it for oil removal and drainage; The hydraulic cylinder converts the pressure energy of the hydraulic oil into mechanical kinetic energy, lifts the lifting object, the hydraulic cylinder of the manual hydraulic pump and the hydraulic cylinder of the extrusion product workpiece (commonly known as the extrusion hydraulic cylinder) constitutes the simplest hydraulic control system, and realizes the transmission and transformation of the driving force (force and fitness movement). Its working characteristics are as follows.

a. The main parameter of the liquid corresponding to the external load force is the hydraulic pressure, and the main parameter of the liquid corresponding to the movement speed is the liquid flow. Therefore, pressure and flow are the two most basic main parameters in 60mm spur gear motor wholesale.

b. If various damages are not included, the force and speed transmitted by 60mm spur gear motor wholesale manufacturers are irrelevant to each other, so 60mm spur gear motor wholesale can complete all motion laws unrelated to the load. It can also rely on a variety of control organizations to complete a variety of motion laws related to load.

c. The power of the hydraulic press is equal to the multiplication of the working pressure and the data flow, which corresponds to the multiplication of the rated power equivalent to the voltage and current in the electrical control system. In the modern electronic technology of analysis, design scheme and system performance of 60mm spur gear motor wholesale, the hydraulic - electrical correspondence relationship is often used to simplify the difficulty factor, reduce the development schedule of the design scheme and reduce the manufacturing cost.

60mm spur gear motor wholesale https://www.dydzmotor.com/spur-gearbox