The durable precision milled pressure plate may generate considerable noise during operation, which not only affects the physical and mental health of the operators, but also may interfere with the surrounding working environment. Therefore, it is crucial to take effective sound insulation measures. The following are some detailed suggestions on how to do a good job in sound insulation of durable precision milled pressure plate:

I. Self-regulation of the equipment

Adjust the air pressure: According to the characteristics of the welded products, adjust the operating air pressure of the durable precision milled pressure plate to an appropriate range (usually 2-5kg/cm²) to reduce the noise caused by excessively high or low air pressure.

Fine-tune the height of the die head: Use the fine-tuning screws on the durable precision milled pressure plate to finely adjust the up and down height of the die head to ensure stability during the welding process and thereby reduce noise.

Set appropriate welding parameters: including delay time, welding time and curing time. When the machine makes a shrill scream, special attention should be paid to adjusting the delay time to reduce the generation of noise.

Second, use sound insulation equipment

Ultrasonic sound insulation cover: This sound insulation cover is made of a 100mm thick sound-absorbing and sound-insulating wall with a folded and pressed steel plate interlayer. The inner side uses a hollow double sound insulation structure and is filled with high-quality sound-absorbing materials. This sound insulation cover can effectively reduce the noise of the durable precision milled pressure plate to below 80 decibels, providing the operators with a quiet working environment. The sound insulation cover is also equipped with an automatic movable door for easy observation and operation.

Sound insulation walls and sound insulation boards: Sound insulation walls or sound insulation boards are set up in the factory building to isolate the durable precision milled pressure plate from other working areas in order to reduce the spread of noise.

Iii. Other sound insulation measures

Place shock-absorbing pads: Placing shock-absorbing pads or shock-absorbing materials around the durable precision milled pressure plate can reduce the vibration of the equipment during operation, thereby reducing the generation of noise.

Regular inspection and maintenance: Regularly maintain and service the durable precision milled pressure plate to ensure that all its components are in good working condition and avoid noise caused by equipment failure or aging.

Wearing earplugs: Although this is not a direct sound insulation measure, having operators wear earplugs and other labor protection equipment can to a certain extent reduce the impact of noise on personnel.

To sum up, through the comprehensive application of the equipment's self-regulation, the use of sound insulation equipment and other sound insulation measures, the noise level of the durable precision milled pressure plate can be effectively reduced, creating a quieter and more comfortable working atmosphere for the operators and the surrounding environment.

durable precision milled pressure plate https://www.nuknail.com/