The central dust collector for sale uses high voltage electricity to generate electrostatic suction and the resistance of the bag itself to adsorb dust particles in the flue gas to the bag, and then through the seismic force generated when the fold of the bag is unfolded, the collected particles and dust fall into the hopper through the action of gravity, so that the dust is dropped. It is often said that the screw air compressor provides the air source for the reverse blowing of the bag dust collector to achieve the pulse reverse blowing function of the equipment and the normal operation of the equipment.

When designing or selecting a bag filter according to the air volume, it is generally not possible to make the dust collector run in excess of the specified air volume, otherwise, the filter bag is easy to clog, the life is shortened, the pressure loss is greatly increased, and the dust removal rate should be reduced. However, the air volume can not be selected too large, otherwise it will increase equipment investment and occupy an area, and waste resources and not save energy. The correct choice of air volume is often determined according to the process situation and experience.

The central dust collector for sale is an improved pulse bag dust collector based on the cloth bag dust collector. In order to further excellent pulse bag dust collector, the modified pulse bag dust collector retains the advantages of good purification rate, large body capacity, stable performance, easy operation, good filter bag life, small maintenance workload and so on.

When lifting the vacuum cleaner equipment, care should be taken to avoid damaging the packaging box and accessories. The top bore is smaller than the dust collector and is welded to the top of the ash storage unit. Turn on the induced draft fan. Turn on the air compressor and connect the soft connection to the dust collector reservoir. Before installation, check the parts of the dust collector, whether the parts are in good condition, if the lack of damage or deformation is found, it can be installed after repair. When installing the filter bag, it should be vertically fixed in the dust collector, and the installation should be tightly fixed. Filter products are made of breathable filter materials and high frequency vibration devices. A central dust collector for sale at the top of the tank gives the machine good dust removal performance. It is mainly used for dust removal of asphalt mixing station and dust removal of powder box in cement, chemical, agriculture and other industries. It has the characteristics of easy installation and good service life.

central dust collector for sale airflow distribution device design principles:

1, the ideal uniform flow in accordance with laminar flow conditions, the flow section is required to slow down and the flow rate is very low to achieve laminar flow, the main control means is to rely on the appropriate configuration of the guide plate and distribution plate in the bag dust collector, so that the air can obtain a more uniform distribution, but in the large section of the bag dust collector to rely on the theoretical design of the configuration of the baffle is difficult, so often with the help of some model tests, In the test, the position and form of the baffle are adjusted, and the conditions are selected as the basis of the design.

2. While considering the correct distribution of air flow, it is necessary to consider the arrangement of dust filter bags in the bag room and the flow of air flow, both the equipment resistance and the role of dust removal.

3, the inlet and outlet pipe design of the bag dust collector should be considered from the entire engineering system, as far as possible into the dust collector air distribution is uniform, multiple dust collectors are used in parallel, should try to make the inlet and outlet pipe in the dust collection system position.

4, in order to make the airflow distribution of the bag dust collector reach the ideal degree, sometimes before the dust collector is set into operation, the field also has to do further measurement and adjustment of the airflow distribution plate.

The central dust collector for sale integrated the advantages of separate chamber reverse blowing and pulse jet dust bag collector, overcomes the shortcomings of insufficient strength of separate chamber reverse blowing and simultaneous dust cleaning and filtration by pulse jet, thus expanding the application range of the bag dust collector. Due to the structure of this type of dust collector, So the dust collection rate, the service life of the filter bag.

central dust collector for sale https://www.kaisenfilter.com/Central-Dust-Collector